Announcement

Collapse
No announcement yet.

Slack problem..

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Slack problem..

    Hello.

    My RD10 with my nd6 has a lot of slack.
    The screw seems loose.
    Any advice to squeeze it ??
    It is impossible to level it ..

    Thanks!!

    Sergio

  • #2
    We have a small problem with early production RD10. Check if your unit is affected.
    Use a tape to remove the bubble level. Use a 4mm hex key to remove the screw mounting the rotator, check that the RD10 does not have a through hole at the center. Otherwise, ask your dealer for replacement. Reinstall the screw and bubble to retighten it.
    Nick
    Fanotec
    We listen. We try harder.

    Comment


    • #3
      Thank you! . I'm going to check that.
      But if it was one of the first units ..

      Comment

      Working...
      X