Announcement

Collapse
No announcement yet.

NN5L and T1i settings?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • NN5L and T1i settings?

    Does anyone have the setting for the nodal point using a NN5L, t1i and 18mm (kit) lens, so I have somewhere to start?

  • #2
    Re: NN5L and T1i settings?

    Originally posted by rskern View Post
    Does anyone have the setting for the nodal point using a NN5L, t1i and 18mm (kit) lens, so I have somewhere to start?
    I have found the bottom rail (11.5), as I could focus straight down on the nodal ninja icon.

    Comment


    • #3
      Re: NN5L and T1i settings?

      Check your lower rail setting with this method: http://www.easypano.com/forum/displa...1&TopicID=4162

      Imagine a blade of a circle saw. The short side of the teeth cut. Move to side where the "blade" show the short side = cutting side of the tooth.

      Heinz

      Comment


      • #4
        Re: NN5L and T1i settings?

        You can find your settings in this database : http://wiki.panotools.org/Entrance_Pupil_Database.

        For lower rail setting add 13mm to (H) for NN5, this is tested with my equipment. Might be 11-13mm.

        For upper rail setting add (L1) and (L2) to get the setting at different zoom settings.

        Check your personal combination, it might be different because a lot of reasons.

        http://www.johnhpanos.com/epcalib.htm

        Heinz

        Comment

        Working...
        X