Announcement

Collapse
No announcement yet.

Assembling old Nodal Ninja 3 on a new R-D16 rotator

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Assembling old Nodal Ninja 3 on a new R-D16 rotator

    I purchased a new R-D16 rotator to upgrade my older Nodal Ninja 3. The kit came with two small, clear/whitish o-rings. Where do those o-rings go:
    on the two plastic stubs on the adapter plate which then insert into the 2 holes in the top of the R-D16 rotator, or
    in the two holes in the plastic adapter plate that the brass pins in the horizontal arm then insert into?
    Thanks

  • #2
    Re: Assembling old Nodal Ninja 3 on a new R-D16 rotator

    Originally posted by mlearmonth View Post
    I purchased a new R-D16 rotator to upgrade my older Nodal Ninja 3. The kit came with two small, clear/whitish o-rings. Where do those o-rings go:
    those o-rings go to the pan lock knob and detent plunger knob. They are spare parts for RD16.


    on the two plastic stubs on the adapter plate which then insert into the 2 holes in the top of the R-D16 rotator, or
    in the two holes in the plastic adapter plate that the brass pins in the horizontal arm then insert into?
    Thanks
    Stubs go the the rotator holes.


    Nick
    Fanotec
    We listen. We try harder.

    Comment

    Working...
    X