Announcement

Collapse
No announcement yet.

Video: How to use the Nadir Adapter with M1-L

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Video: How to use the Nadir Adapter with M1-L

    Hi,

    Now it is there: How to use the Nadir Adapter

    http://vimeo.com/65994333

    Workflow is the same for Nadir Adapter NN3, NN4, NN5.

    You have to use a special set up of the tripod with the panohead, demonstrated in the pics at the end of the video.

    Use minimum DPD Distance to move the tripod sideways. In case you do not get free space between corner of the tripod and tip of the third leg, move further.

    In PtGuiPro you have to set the Viewpoint correction for Nadir2.



    Heinz

  • #2
    Thank you for this video. I was not quite sure how to use the adapter when I bought it, but its much clearer now. Now I only have to figure out how to do all the corrections in ptgui.. ;)

    Comment


    • #3
      Thank you Heinz
      Sony A-57 & A-77ii
      Rokinon 8mm F3.5
      70-210 F4.0
      28-105, 28mm, 50mm,
      Sigma 10-20
      Manfrotto HK294
      Nodal Ninja 4 with RD 16 rotator and Nadir adapter
      Wireless shutter release, Cable release
      PTgui Pro - Panotour Pro - PS Cs5

      Comment


      • #4
        Hi Heinz,

        Thanks a lot for the support on NN community.

        Nick
        Fanotec
        We listen. We try harder.

        Comment


        • #5
          Does any one know how to slide along the Ultimate M1 Nadir Adapter on the lower rail to avoid getting the rail on the photos.
          Thank You
          Regards
          Erwin

          Comment


          • #6
            Hi Erwin,

            You can not slide it along the lower rail to "avoid the rails". The Nadir Adapter is fixed to the lower rail. I do not quite understand what you mean, so can you please send some pics with www.ge.tt or try to explain? What's your camera - lens combination?

            Regards,
            Heinz
            Last edited by hindenhaag; 08-10-2013, 09:16 AM.

            Comment

            Working...
            X