Announcement

Collapse
No announcement yet.

RD5 with a clamp

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • lnh062
    started a topic RD5 with a clamp

    RD5 with a clamp

    Will the QRC-35 clamp fit on top of the RD5 directly? Will any other clamps work as well?

  • nick fan
    replied
    Originally posted by lnh062 View Post
    Received the RD5 and QRC-35 today. No directions or online manuals for either. Honestly, I fail to see a good way of mounting the QRC-35 to the top of the RD5. The spacing of the two holes on the QRC-35 do not line-up with the threaded hole on the RD5. You can put a screw in one of the non-centered threaded holes, and the other hole lines up with an adjacent non-threaded hole, but obviously that isn't a good way to mount this. What am I missing?
    Hi lnh062,

    Sorry I made a terrible mistake! QRC-35 is not compatible with RD4/ RD5. I mixed up with Rotator Mini.
    Please let me know which reseller you get the QRC-35. I will arrange an free replacement. You need a QRC-40A/55/65. Let me know which you like.

    Nick

    Leave a comment:


  • lnh062
    replied
    Received the RD5 and QRC-35 today. No directions or online manuals for either. Honestly, I fail to see a good way of mounting the QRC-35 to the top of the RD5. The spacing of the two holes on the QRC-35 do not line-up with the threaded hole on the RD5. You can put a screw in one of the non-centered threaded holes, and the other hole lines up with an adjacent non-threaded hole, but obviously that isn't a good way to mount this. What am I missing?

    Leave a comment:


  • hindenhaag
    replied
    A pic tells a lot:

    Click image for larger version

Name:	DSC_4675.jpg
Views:	1
Size:	135.7 KB
ID:	25284

    Heinz

    Leave a comment:


  • nick fan
    replied
    Originally posted by lnh062 View Post
    It's a bit difficult to see in the pictures, but does the RD5 have 3 threaded sockets on the top? When you say any clamp would fit, I assume you're suggesting the center hole on the RD5 will fit any clamp with a center hole. If you want to make use of two holes, would you then be restricted to the QRC-35 only, or would the QRC-65 also work? Thank you.
    with QRC-35, you use 2 M5 mounting screws.
    with other QRCs, you use central M6 mounting screw and 2 anti-twist screws.

    Nick

    Leave a comment:


  • lnh062
    replied
    It's a bit difficult to see in the pictures, but does the RD5 have 3 threaded sockets on the top? When you say any clamp would fit, I assume you're suggesting the center hole on the RD5 will fit any clamp with a center hole. If you want to make use of two holes, would you then be restricted to the QRC-35 only, or would the QRC-65 also work? Thank you.

    Leave a comment:


  • nick fan
    replied
    Originally posted by lnh062 View Post
    Will the QRC-35 clamp fit on top of the RD5 directly? Will any other clamps work as well?
    Any of our clamps works fine. QRC-35/40 look best.

    Nick

    Leave a comment:

Working...
X