Announcement

Collapse
No announcement yet.

RD5 with a clamp

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • RD5 with a clamp

    Will the QRC-35 clamp fit on top of the RD5 directly? Will any other clamps work as well?

  • #2
    Originally posted by lnh062 View Post
    Will the QRC-35 clamp fit on top of the RD5 directly? Will any other clamps work as well?
    Any of our clamps works fine. QRC-35/40 look best.

    Nick
    Fanotec
    We listen. We try harder.

    Comment


    • #3
      It's a bit difficult to see in the pictures, but does the RD5 have 3 threaded sockets on the top? When you say any clamp would fit, I assume you're suggesting the center hole on the RD5 will fit any clamp with a center hole. If you want to make use of two holes, would you then be restricted to the QRC-35 only, or would the QRC-65 also work? Thank you.

      Comment


      • #4
        Originally posted by lnh062 View Post
        It's a bit difficult to see in the pictures, but does the RD5 have 3 threaded sockets on the top? When you say any clamp would fit, I assume you're suggesting the center hole on the RD5 will fit any clamp with a center hole. If you want to make use of two holes, would you then be restricted to the QRC-35 only, or would the QRC-65 also work? Thank you.
        with QRC-35, you use 2 M5 mounting screws.
        with other QRCs, you use central M6 mounting screw and 2 anti-twist screws.

        Nick
        Fanotec
        We listen. We try harder.

        Comment


        • #5
          A pic tells a lot:

          Click image for larger version

Name:	DSC_4675.jpg
Views:	1
Size:	135.7 KB
ID:	25284

          Heinz

          Comment


          • #6
            Received the RD5 and QRC-35 today. No directions or online manuals for either. Honestly, I fail to see a good way of mounting the QRC-35 to the top of the RD5. The spacing of the two holes on the QRC-35 do not line-up with the threaded hole on the RD5. You can put a screw in one of the non-centered threaded holes, and the other hole lines up with an adjacent non-threaded hole, but obviously that isn't a good way to mount this. What am I missing?

            Comment


            • #7
              Originally posted by lnh062 View Post
              Received the RD5 and QRC-35 today. No directions or online manuals for either. Honestly, I fail to see a good way of mounting the QRC-35 to the top of the RD5. The spacing of the two holes on the QRC-35 do not line-up with the threaded hole on the RD5. You can put a screw in one of the non-centered threaded holes, and the other hole lines up with an adjacent non-threaded hole, but obviously that isn't a good way to mount this. What am I missing?
              Hi lnh062,

              Sorry I made a terrible mistake! QRC-35 is not compatible with RD4/ RD5. I mixed up with Rotator Mini.
              Please let me know which reseller you get the QRC-35. I will arrange an free replacement. You need a QRC-40A/55/65. Let me know which you like.

              Nick
              Fanotec
              We listen. We try harder.

              Comment

              Working...
              X