Announcement

Collapse
No announcement yet.

Help needed about tripods and center columns, please send IM

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help needed about tripods and center columns, please send IM

    Hi NN friends,

    I am talking about the R1/R10 new Zenith Nadir Adapter.

    To reset the camera back to NPP, besides other things, you have to raise the center column to bring the camera to old NPP height because the camera will turn aside in a lower position being ready for Zenith shot.

    Nick decided to make rings being placed to the center column to get a fixed and easy to use repeatable NPP position in height.

    As you know, everyone may use different tripods, with center columns of different diameters. As usual, no infos available from Producers.

    I have sent several requests to Manfrotto/Gitzo EU Group being official distributors, after some mails, I got a response.

    They have to ask Gitzo themselves because they have no data, they offer to measure Manfrotto themselves. "What sort of center column are you interested in?", though I asked for measurements of all available center columns.

    I know there was a long list of tripod we use, but let us update this database.

    My goal is to send infos to Nick about different center columns and its diameters of different branches tripods so that everybody gets the right rings for his own center column.

    I feel it is the best way to send this via IM to me to keep the forum free of lot's of infos.

    Nick is busy with all the new products, so using this way we can give him a helping hand, at least this will turn us to happy NN customers.

    May be you could send model number, branch, and diameter of center column as well. This would help a lot.

    NN and Fanotec are small companies spending a lot of respect and help to their customers. So let us return their inputs, add help for "Add On's"

    Thx in advance,
    Heinz
    Last edited by hindenhaag; 05-24-2011, 04:49 PM.

  • #2
    A hose clamp from your hardware store should work on most center columns. Not the prettiest, but gets the job done.

    Comment


    • #3
      Or just scratch or paint a mark -- jeeze people.

      Comment


      • #4
        When you are adjusting your pano head, having a positive stop makes things so much easier. If you have a clamping device on the bottom of the center column, all you do is pull up and you will have the pano head at the same spot each time. No fiddling about. Sure a mark on the center column will work, but life is so much easier if you have something clamped there. That is why we have index stops in the rotator and upper arm pivot instead of just painted lines.

        Comment


        • #5
          Originally posted by DennisS View Post
          When you are adjusting your pano head, having a positive stop makes things so much easier. If you have a clamping device on the bottom of the center column, all you do is pull up and you will have the pano head at the same spot each time. No fiddling about. Sure a mark on the center column will work, but life is so much easier if you have something clamped there. That is why we have index stops in the rotator and upper arm pivot instead of just painted lines.
          French Nodal Ninja Distributor
          Blog: http://www.skivr.com
          Online shop: http://magasin.skivr.com
          Photo gallery: http://flickr.com/skivr
          Support website: http://support.skivr.com

          Comment


          • #6
            Hi Heinz,

            thx for your help in collecting these valuable data. I have made a few lock rings. Their diameter is 24, 25, 26, 28, 32mm. I guess 28mm is the most popular. if any one has a center column of different diameter, please input here.

            Nick
            Fanotec
            We listen. We try harder.

            Comment


            • #7
              Originally posted by nick fan View Post
              thx for your help in collecting these valuable data. I have made a few lock rings. Their diameter is 24, 25, 26, 28, 32mm. I guess 28mm is the most popular. if any one has a center column of different diameter, please input here.
              Based on my sales here I confirm 28mm is most sold, then 26 and then 25.

              Vincèn
              French Nodal Ninja Distributor
              Blog: http://www.skivr.com
              Online shop: http://magasin.skivr.com
              Photo gallery: http://flickr.com/skivr
              Support website: http://support.skivr.com

              Comment

              Working...
              X