Announcement

Collapse
No announcement yet.

Someday a SuperUltimate NodalNinja pano head

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Someday a SuperUltimate NodalNinja pano head

    It will have vernier screws for all adjustments rather than the slide and tighten adjustments that are used now.

    It's hard to do precise adjustments with the current set up. there's a small amount of twist in all three axises of each adjustment and loosening -- sliding -- tightening procedure can be very frustrating.

    It won't be cheap but the pro's will like it -- I think

    But this is just my opinion...

  • #2
    Re: Someday a SuperUltimate NodalNinja pano head

    Originally posted by DemonDuck View Post
    It will have vernier screws for all adjustments rather than the slide and tighten adjustments that are used now.

    It's hard to do precise adjustments with the current set up. there's a small amount of twist in all three axises of each adjustment and loosening -- sliding -- tightening procedure can be very frustrating.

    It won't be cheap but the pro's will like it -- I think

    But this is just my opinion...
    you should not need more than 0.5mm accuracy in the NPP settings. Most of time, 1mm is more than enough.

    Nick
    Fanotec
    We listen. We try harder.

    Comment

    Working...
    X