View Full Version : rotator mini 4 stops
02-01-2013, 01:16 PM
Hi, I wonder you wonderful people at ninja are going to make a rotator mini with four stops only? My set up with pole and R10 80% of the time requires four stops.
02-01-2013, 10:40 PM
You can get rotator mini replacement rings to change the number of stops in case you need to change them. Buy the rotator with your favorite number of stops and in case you like to change number of stops just buy a second ring.
To change the ring place the rotator between thumb at bottom and two fingers on top on the ring. Then open the two hex screws 180° opposite and take off the ring. Place the new ring on top, press it down against the rotator body - spring loaded click ball below the ring - and fix the screws.
Powered by vBulletin® Version 4.2.2 Copyright © 2015 vBulletin Solutions, Inc. All rights reserved.