Foot plate solution [Archive] - Nodal Ninja Forum

PDA

View Full Version : Foot plate solution



softgad
09-26-2011, 04:40 PM
Hi

I have recycle my nn180 as a foot plate for my pole 1 (might be inadequate for the complete serie). I have customize the base so a solid rubber mat prevent paint degradation of the unit. It works really well for me. Any thoughts

nick fan
09-26-2011, 07:37 PM
Hi

I have recycle my nn180 as a foot plate for my pole 1 (might be inadequate for the complete serie). I have customize the base so a solid rubber mat prevent paint degradation of the unit. It works really well for me. Any thoughts

A good one!
But our footplate still has one advantage that you don't need to step on it to prevent it from turning.

Nick

Bill Bailey
10-01-2011, 06:53 AM
Hi

I have recycle my nn180 as a foot plate for my pole 1 (might be inadequate for the complete serie). I have customize the base so a solid rubber mat prevent paint degradation of the unit. It works really well for me. Any thoughts
The pole rotator and footplate is better option but nonetheless this is interesting mod.
I would suggest getting some of the RD4 silicon plugs to protect the rotator from getting dirt inside. Also depending on the amount of of wear and tear on your NN180 you should give good wipe down after each use to prevent moisture from causing long term ill effects.


thx for sharing
Bill