Special grip for Ultimate R1/R10 to attach on bar ?

[Vincèn]

Hey,

I was thinking of a new accessory missing (well at least for me :blush:). I'd like to be able to use my Ultimate R1 attached on a metallic bar so I would need something like a gorillapod but more robust probably two grips in metal linked together by a bar and including on top 3/8" screw so I can screw on it my R1 ! What do you think about it ? Do you understand what I mean ?

Vincèn

[DennisS]

WT?

[nick fan]

http://www.amazon.com/Swivel-Camera-Stand-Tripod-C-Clamp/dp/B001CWF8ES

somthing similar to above one?

Nick

[Vincèn]

http://www.amazon.com/Swivel-Camera-Stand-Tripod-C-Clamp/dp/B001CWF8ES
somthing similar to above one?
Right but something less big and more large with perhaps two grips to allow easier fix and better stability :)

Vincèn

[hindenhaag]

May be one of these?

http://www.cameranu.nl/artikel/154644/Opteka_CXS-1_Video_Shoulder_Stabilizer_Support_System.html ?

Heinz

[Vincèn]

http://www.cameranu.nl/artikel/154644/Opteka_CXS-1_Video_Shoulder_Stabilizer_Support_System.html ?
Nope, really need something that holds by itself on a bar (something like that: http://ecx.images-amazon.com/images/I/41zhHipEuUL._SL500_AA300_.jpg)
two of these attached by a solid metal bar on which you have the screw to put on it your R1 :)

Vincèn

[Hugh]

Vincèn, what size bar are you considering?

I made a device like this by purchasing a pipe cutter for the size of a bar I was using, removed that actual cutting blades and tapped a 1/4" Whitworth thread into the metal to fit a bit of 1/4" Whitworth so I could attach my camera or Nodal Ninja.

From your photograph it would seem possible to tap a 1/4" Whitworth into that device.

Hugh.

[superpants]

http://www.filmtools.com/cardellini-double-spud-threaded-3-8-16-3d.html


this maybe?

[Vincèn]

http://www.filmtools.com/cardellini-double-spud-threaded-3-8-16-3d.html
right two like these articulated together so you can attach it easily and efficiently :)

Vincèn