View Full Version : Lower rail settings with NN3

03-15-2010, 07:00 AM
Hi guys,

Could please somebody of you with an NN3 measure the distance of the CP to the lower rail setting as i did with the NN5. I have chosen to set the cp-2 vertical to 60mm on the lower rail and the reading of the vertical rail is 73=13mm.

This means that we have to add 13 mm to (H) of the camera body in the data base wiki.panotools.org/Entrance_pupil_database for a lower rail setting with an NN5.

I suppose the distance is less with an NN3.

Thx in advance


03-15-2010, 07:06 AM
Now the photo:


03-15-2010, 09:54 AM
Hello Heinz,

Are these the dimensions you are looking for?

Best regards, Hugh.