CP-2 (mounting plate) bonus feature for Olympus E-30 users [Archive] - Nodal Ninja Forum

PDA

View Full Version : CP-2 (mounting plate) bonus feature for Olympus E-30 users



Krx
03-13-2010, 04:00 AM
Hello

Finally I've tested new CP-2 anti twist mounting plate, http://store.nodalninja.com/product_p/cp-2.htm and I'm confirming that it does its job.
I also discovered nice "bonus" feature.
In Olympus E-30 camera, there are 4 buttons below the rotating screen.
When camera is carried around with neck strap, if camera is on, those buttons are often accidentally pressed by own body.
But not any more. CP-2 plate also added nice "protection" against accidental pressing. :biggrin:
See attached image.

Rergards

Vincèn
03-13-2010, 06:40 AM
nice unexpected feature :biggrin:

Stealth
03-13-2010, 11:17 AM
Really nice bonus :001_smile:

pgielen
04-28-2010, 01:38 PM
Just bought a CP-2 and got it today. There's another bonus: it shows the position of the camera on the upper rail much more clearly than the original rubber thingy that came with the NN3. I noticed that my rail stop was off by 1mm. And now, I don't need a seperate bubble level in the hot shoe anymore (the accuracy of which I have always doubted anyway).