PDA

View Full Version : Someday a SuperUltimate NodalNinja pano head



DemonDuck
11-25-2009, 10:43 PM
It will have vernier screws for all adjustments rather than the slide and tighten adjustments that are used now.

It's hard to do precise adjustments with the current set up. there's a small amount of twist in all three axises of each adjustment and loosening -- sliding -- tightening procedure can be very frustrating.

It won't be cheap but the pro's will like it -- I think :ohmy:

But this is just my opinion...

nick fan
11-26-2009, 12:43 AM
It will have vernier screws for all adjustments rather than the slide and tighten adjustments that are used now.

It's hard to do precise adjustments with the current set up. there's a small amount of twist in all three axises of each adjustment and loosening -- sliding -- tightening procedure can be very frustrating.

It won't be cheap but the pro's will like it -- I think :ohmy:

But this is just my opinion...


you should not need more than 0.5mm accuracy in the NPP settings. Most of time, 1mm is more than enough.

Nick