Please confirm Tokina Settings for Canon 40D [Archive] - Nodal Ninja Forum

PDA

View Full Version : Please confirm Tokina Settings for Canon 40D



kaidot
07-31-2009, 11:19 AM
Hello
I just received my new Tokina AT-X 10-17mm Fisheye for my Canon EOS 40D. In the camera list I saw the upper rail setting is 98mm (lens set at 10mm). It seems like I have parallax here. Could it be eventually another setting? Is there anybody out there how could give me the correct setting please?

I am using the Nodal Ninja 5L

Also: what is the best aperture setting? I tried now f11, f8 and next would be f7.1 - but maybe I first have to resolve the before mentioned setting.

Thanks
Kai

John Houghton
08-01-2009, 07:49 AM
Try an upper rail setting of 92mm. Better still, determine it youself - http://www.johnhpanos.com/epcalib.htm. The f/no setting is going to affect the image sharpness and depth of field. Compare the images you have taken in an image editor such as Photoshop and decide which you like the best.

John

kaidot
08-01-2009, 06:24 PM
Thanks John

I'll try it. Up to now I tried 93mm-101mm whereby my impression is that the94mm was the best until now.

Regards
Kai

kaidot
08-03-2009, 04:07 PM
After tryingI ended up with "my" best setting at 93mm.

Wim.Koornneef
08-04-2009, 04:37 AM
Hello kaidot,

The proper setting of the camera on the upperarm depends on the number of shots around, the setting of 98mm is only usefull when taking 3 shots@10mm on a full frame sensor camera.
I think you will shoot 6 around and then the optimum NPP setting differs 4mm from the setting for 6 around (lens moved forwards) so then you end up with 98- 4 = 94mm.

Due to tolerances in mounting the camera a maximum difference of 1 mm is fine so in your case the 93mm you found could be very well accurate.
In case you get errors later then use 94mm, but only if you get errors, otherwise stick to your own setting.

Success,
Wim




After tryingI ended up with "my" best setting at 93mm.