Exposure bracketed pano on Willamete River, Ship, steel bridge [Archive] - Nodal Ninja Forum


View Full Version : Exposure bracketed pano on Willamete River, Ship, steel bridge

03-27-2009, 03:24 AM
Exposure bracketed using Nintendo Panocam at ISO 100, f/8, {4, 9, 19, 39, 88 } seconds, 20mm, 2900 Kelvin.
Used n15 every 24 degrees on my NNL5.



Bill Bailey
03-27-2009, 07:59 AM
Great HDR - gives the image a bit more added punch!
If you haven't ever taken the Willamette River Jet Boat Tours I would highly recommend it.
Keep up the great work and thanks for sharing.

03-27-2009, 12:51 PM
I shot the 360 panoramas for their ships that are on their web site. I took a 360 pano that is on 360cities.net that shows the Hunt for red October submarine and one of the Jetboats. I will have to try out the jet boat.


04-02-2009, 12:42 AM
St John's Bridge, 22mm, n=15

04-02-2009, 11:15 AM
Very nice!

If you don't mind my asking, what was your workflow for the HDR?
Did you stack the images individually for each view(and then stitch separately), or let a stitcher like PTgui do it all from a ton of images?

04-02-2009, 01:45 PM
I use the details enhance and hdr mode in photomatix using the bracketed set of camera RAW files. I enable alignment by feature and check do not crop. I use 16 bit TIFF and a HDR format such as radiance or openEXR. I then stitch the images in Ptgui or Autopano Pro. Then I do edits in CS3 extended. The bridge had 7 brackets per position which took about 15 minutes and 25 seconds per panorama head position.

04-02-2009, 09:22 PM
Thanks much, I was curious how you'd gone about it. Sounds like a labor of love!