PDA

View Full Version : Temp Solutions For Rotating Quick Release Clamp?



PrOxY
12-20-2008, 04:18 PM
Many thanks to nick fan awesome product and for his help and assurance that a solution for my issue will be available soon in the store!
In the interim, I thought I would see if anyone else who was using an RRS "L" bracket had come up with a temp fix to this (upper arm camera clamp rotates).
I have both the Markins and RRS clamps but both spin even with the rubber insert.
http://i203.photobucket.com/albums/aa34/proxy2/RRSMarkins.jpg

Thanks,

waters
12-20-2008, 08:38 PM
See this thread for ideas. http://nodalninja.com/forum/index.php?topic=63.0 You need to key something into the bottom of the QR clamp to keep it from rotating.

nick fan
12-23-2008, 07:45 AM
This rail plate should work for you
http://store.nodalninja.com/product_p/rp1-38.htm
see the sample set up of RRS clamp.

The 3/8"-1/4" adapter has some problem with old NN knobs. It is now on hold and will be available in Jan again.


Nick

PrOxY
12-23-2008, 03:41 PM
This rail plate should work for you http://store.nodalninja.com/product_p/rp1-38.htm see the sample set up of RRS clamp. The 3/8"-1/4" adapter has some problem with old NN knobs. It is now on hold and will be available in Jan again.
Nick


Nick, assuming that although it says "NN5/L Accessories" its good to go with my old NN3, that rail plate looks like the winner!!! Unfortunately, its an out of stock item so it looks like January will see a couple of solutions for me :biggrin: I'll definitely hold off on my epoxy idea.....lol.
Many thanks,