View Full Version : Does NN3 MKII support use of Nikon 17-55 2.8 with D200??
12-01-2008, 09:02 AM
I've been searching through the forum and the supported setup lists but cannot find any mention if the NN3 supports the use of a 17-55 Nikon lens when paired with a D200. Unfortunately the budget wont stretch to a new wideangle lens and a NN3 at the same time so I wanted to try with the 17-55 that I already own. Long term plan would be to move to a sigma 10-20 that seems to be well recommended.
Anyone have a definate answer?
12-01-2008, 07:23 PM
I think I hear customers saying NN3 does not support Nikon 17-55 2.8. It is a big lens.
Size: 3.4" (86mm) around by 4.4" (110 mm) long
Weight: 27 oz (760 g)
12-02-2008, 06:26 AM
Is there a list of measurements anywhere for the maximum length supported from screw mounting point to rotation point I could then do some manual measurements to see how far out it might be. Maybe the use of a T adaptor on the end might bring it within tolerance levels.
12-02-2008, 06:49 AM
it is too big and too heavy. You want to get best result out of your expensive lens and camera otherwise there is no point to buy a 17-55mm F2.8. You can get a 18-55mm or a 18-70mm kit lens for much less. :-) The heavy lens will cause too much vibration on NN3II.
Powered by vBulletin™ Version 4.0.3 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.