View Full Version : Nodal Ninja 3 mkII and Sunex Superfisheye

Mauro Contrafatto
05-29-2008, 05:27 AM
Hi there everybody!

I thought it was interesting to show how the Sunex Superfisheye lens performs with Nodal Ninja 3 mkII.

This is an example I shot in a hurry in a room inside a local fort which was recently restored and used for shows and exhibitions in Messina, Sicily, Italy.

It took only 1 minute to set up the equipment, 10 seconds to take the 3 pictures around, in a moment when no one else was in the room, and another 10 minutes to stitch the shots together with Realviz Stitcher.


The virtual tour is available here (http://www.flickr.com/photos/mcontrafatto/2531575111/) with the excellent SPi-V plugin fro Flickr!

nick fan
05-29-2008, 05:38 AM
hi Mauro,

Good job.

is the camera attached onto the upper rail? Is T-adapter used? Any more room for adjustment on the rail?


Mauro Contrafatto
05-29-2008, 05:54 AM
Hey Nick,

the camera (EOS 350D) was attached in portrait position to the upper rail. No T-adapter needed. "B" setting is 103mm. With the new camera mounting plate, there are still a few millimetres of clearance.


Bill Bailey
05-29-2008, 06:48 AM
nice work Mauro!
Curious if there are any tricks to removing glare like this. Looks like you selected a good angle to shot from to lessen it.